how to wash work boots

How to wash work boots

Are you wondering how to clean up your work boots? Then at some point, you will want some of the reliable and useful tips to do it. If you ask how to clean work boots, then you will have to know your work boots get caked with dust, oil, dirt, and some other substances until you’re told that they stay outside or you do with them on! In addition to that, occasional cleaning is suitable for leather.

A lot of people ask How to clean leather work boots, and they need to know the few steps. Though, this is not as simple as hosing them down, which would actually be bad for them. In its place, how to wash work boots inside and out takes some care to ensure that they don’t get damaged. It isn’t too hard, but you will have to remember that your work boots are an investment in your comfort and safety. So, once you want to know How to clean Suede or Nubuck work boots, make sure you understand the essential points.

Your work boots are the most durable footwear that you own. But, with all the wear and tear that they endure, it is not surprising that they can get really dirty real soon. With the dirty interior and exterior also comes the smelliness of the footwear. Now, you wouldn’t be throwing away your favorite steel toes just because they are dirty. What you can do, however, is to figure out ways to clean those boots as soon as they start looking dirty. Here are some of the ways for you to clean your work boots.

How to Clean Work Boots: The Outside

If you ask How To Clean Work Boots: The Outside, you will have to ensure that you remember the four simple steps like clean, conditioning, polish, and weatherproofing.

Clean

When you have a question like How to clean work boots from Synthetic Material, make sure you know the proper cleaning process. Try to utilize the piece of dry cloth and leather cleaner. Wipe as much of the dirt as you can.

Conditioning:

Now, you will have to know How do you get the smell out of work boots? And for that, you will have to condition your work boot. You will have to let the shoes dry before applying the conditioner. Then, you can simply rub the oil in all areas with a dry cloth. Let the boots dry and use another piece of cloth to remove the excess oil.

Polish

Like a lot of people there ask How do you clean smelly boots? For them, there is a specific option of conditioning. And once you are done with that step, just polish it properly. Use the cloth you used to remove the excess oil to clean it. Use a circular stroke when buffing.

Weatherproofing

Then, you can buy the weatherproofing product and apply it on the boots. Are you thinking about how to clean shoes at home? Then, all you need to know about these steps.

Dry Cleaning Kit-Timberland

You can buy this Dry Cleaning Kit-Timberland

How To Clean Work Boots: Insoles And Insides

As you are done with the outsides of the shoe, you will have to know about the inside cleaning. Now, if you ask How To Clean Work Boots: Insoles And Insides, then make sure that you get to know some of the essential procedures.

If you ask how to keep wet shoes from smelling, then you will have to know the process of cleaning the insoles and inside of the work boots. So, the essential things you need are Mild shampoo, Damp washcloth, Dry cloth, and Baking soda. To clean the inside of your work boots, you will need a mild shampoo, mild laundry detergent, baking soda, two socks, rags, and zippered plastic bags. So, let’s get started:

​Process

Cleaning the insole– If you think about how to clean smelly work boots, you will have to know the proper method. This is very much significant for people who have feet sweating problem. Cleaning leather work boots from the inside is very simple if you follow these steps. Take out the insoles and wash them with mild laundry detergent in warm water. Rinse them and let them dry out.

Cleaning the inside

You can use a very mild shampoo to clean the work boot. Put the shampoo inside the sole of the work boot, and then you will have to scrub it up with the damp cloth. Mix a few drops of mild shampoo in warm water. Use a rag and soapy water for thoroughly cleaning the inside of your boots. Fill the inside of your boots with water to clean out any residues. Dry the inside with a clean rag at first and then air-dry completely.

When you want to know how to wash work boots inside, you will have to know about removing it in a proper manner. Wash the shoes and use a dry cloth to wipe the insides. After that, you will have let the boot dry naturally. Repeat these steps for the other boot.

Baking soda for odor

Fill those two socks with a few tablespoons of baking soda. Tie their ends and place them inside the boots for the night. The baking soda will absorb any bad odor and freshen up your boots.

Kill the bacteria

You can put your boots in the zippered plastic bags and then keep them in the freezer overnight. The freezing temperature will kill the bacteria in your boots.

Another Ways to wash and clean steel toes work boots

You can use dish soap but it is much better to get saddle soap because that is made specifically for use on leather products. The following steps must be followed to effectively wash and clean steel toes work boots.

Removing the laces

Take out the laces from the boots and wash them separately or replace them with new ones after you are done the cleaning.

Gently cleaning dirt and debris

Take a soft cloth or brush and go over your boots gently to clean of bigger debris. The cloth or the brush should not be too rough because that would scratch the leather.

Cleaning with soap

Make a mixture of saddle soap and water, or dish soap and water, if you do not have saddle soap. Cover the outside of the boot with the solution and then use another washcloth to wipe it off. Dry the boots with a towel after wiping off the soap.

Applying leather conditioner

Using a leather conditioner makes your boots shine and leather stays hydrated. Let the boot sit for about fifteen minutes after applying the conditioner. Buff your boots with a soft cloth after that to make it shine.

Drying the shoes

Let your boots dry out in open air. You can also put them outside to air dry. Just make sure you don’t put your boots near heaters or damp areas because the leather might crack that way.

Be sure to check out our list of the Best Work Boots For Flat Feet for more great items like this

Dealing with dirty boots

how to wash boots

Each stain does different things to your shoes, and so each must be dealt with differently. But regardless of which stain you are dealing with, there are specific steps you should take before cleaning your boots. Are you thinking How to Clean Leather Work Boots with Household Items? Then you need two clean rags, Shoe brush, Leather soap, and Leather conditioner. Before you figure out what precise stains you are merely trying to remove, you will have to go ahead and give the work boots an initial cleaning to get a better idea of what you’re dealing with.

Salt stains

The winter can be particularly rough on leather boots. All of the salt, which gets used to melt snow, can actually cause permanent damage to leather boots in the form of stains. Here are the steps to removing salt stains by utilizing items you probably already have in your kitchen. You will need vinegar, two rags, and water. Now you will be ready to eliminate those pesky salt stains.

  • You will have to do the solution, which is equal parts vinegar and water—dip a rag in this solution and wipe down the salt stains.
  • You will have to wipe your boots down with a wet cloth
  • Wipe your boots dry with a dry cloth
  • Let all the work boots dry naturally. You will have to ensure you don’t try to speed up the process with heat.
  • Once the boots have dried, buff them again with a dry cloth.

FREQUENTLY ASKED QUESTIONS

How often do you need to clean your boots?

This is one of the most frequently asked questions as far as work boots are concerned. Truth be told, you should wash the boots depending on the type of work boots you have, how dirty they are, and how often they are used. With that being said, it is a good idea to wash your shoes once every two weeks. Dirty shoes do not breathe too well, and all the mud and dirt end up damaging the rubber and weakening the stitch.

Can you wash work boots in the washer?

If you have a question like Can I put my boots in the washing machine? Then, you will have to know that you can. Place boots in the washing machine together right in the front washer and on opposite sides on a top-loading washer.

Can I use a nubuck conditioner for suede work boots?

No. You will have to use one, which is specific for suede. Some of the spray protectors are quite compatible with suede and nubuck, but the conditioners have to be specific.

How often should I waterproof my work boots?

You will have to spray your boots with water once a month. If the water doesn’t bead, it’s time to waterproof the boots again.

So, that is it for all the tips and ideas you need to get your work boots clean. Now, no more going to work in dirty boots, right?

Leave a Comment